When researching fuses, we usually stop by at fuse holders. Because different fusions will be installed on different circuit boards, if the circuit boards are different, then the fuse holder we choose should be different, and the installation location is different, the fuse holder we choose should be different.

fuse holders can be divided into panel mount fuse holders, PCB(hard) board fuse holder, automatic plug-in fuse holder, plug-in fuse holder. fuseholders must contain current, voltage, high temperature and fire rating requirements. These factors mainly depend on the quality of the plastic and metal parts of the fuse holder, the better the quality, the higher the temperature resistance coefficient.

The assembly of the fuse holder consists of nuts, plastic, copper, etc. When electroplating fuse holder terminals, there are certain requirements for the surface of the electroplating production area: anti-corrosion, anti-seepage and anti-liquid accumulation, and the production line has a water tank to collect spray liquid and cleaning liquid device. The primary requirement of an electroplating production line with good electroplating quality is the automatic continuous electroplating production line equipment, which requires good electroplating production process habits.

The quality of the fuse holder terminal plating is good or not directly relatedSubsequent to the welding work, the quality of electroplating directly affects the quality of welding. We often encounter poor welding production processes. Plating oxidation, etc. On the problem, the metal plating surface is very unstable, which is why we have been emphasizing fuse holderThe importance of terminal plating process.